Anderson Metals 754050-1012 Brass Flare Elbow, Lead-free, 5/8 X 3/4 In.

The Anderson Metals 754050-1012 is a lead-free brass flare elbow fitting designed for connecting copper, brass, aluminum, or steel tubing at a 90-degree angle. With a 5/8-inch flare connection on one end and a 3/4-inch female pipe thread (FPT) on the other, this fitting is ideal for plumbing, fuel equipment, gas lines, refrigeration systems, and vacuum applications where reliable connections are essential.

This two-piece flare elbow uses a nut-and-body construction that resists mechanical pullout while remaining easy to disassemble and reassemble multiple times without affecting the seal. The lead-free brass composition is compliant with Public Law 111-380 as well as California AB-1953 and Vermont SB-152 standards. The fitting is rated for 650 psi pressure and maintains a broad operating temperature range suitable for demanding environments.

Features and Benefits

• Lead-Free Brass Construction: Compliant with federal and state regulations for safe use in plumbing systems.
• Two-Piece Design: The nut-and-body construction allows for easy installation and multiple reassemblies without compromising the seal.
• High Pressure Rating: Rated for 650 psi, suitable for demanding plumbing, refrigeration, and fuel system applications.
• Versatile Material Compatibility: Works with copper, brass, aluminum, and steel tubing for flexible system design.
• Resists Mechanical Pullout: Secure connection design that remains reliable under stress.
• Easy to Reassemble: Can be disassembled and reassembled multiple times with no effect on the seal.

Specifications

• Brand: Anderson Metals
• Model: 754050-1012
• Connection Size: 5/8 in. flare x 3/4 in. FPT
• Angle: 90 degrees
• Material: Lead-free brass
• Pressure Rating: 650 psi
• Construction: Two-piece nut and body
• Packaging: Individually bagged

How to Use

• Preparation: Cut a smooth, square end on the tubing to ensure a proper fit.
• Assembly: Slide the nut onto the tube with threads facing the end, then flare the end of the tube.
• Connection: Thread the nut to the body until snug, then tighten an additional 1/6 turn to complete the connection.